
23 × 13 × 8.5 Ft Inflatable Paint Booth — Exhaust Vent
- Category: Paint Booth with Exhaust Fan
- External dimensions: 23x13x8.5Ft
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
The standard configuration is equipped with 2 blowers (480w+950w), but a booth without blowers is also available. · Exhaust Vent Device Connection Option: Side window – Air Draft device 39″x51″ OR Front Door – Mini Air Draft Device 38.6″x29″ · Equipped with an Air Draft Device and Exhaust Fan for the booth. · Comes with inflation and filtration blowers. · High-efficiency Filtration, Replaceable activated-carbon Filter. · Local After-sales Service in the US.
Working room inside this size
The outside envelope is 23 × 13 × 8.5 ft, which takes 299 ft² of shop floor and holds 2,542 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 18 × 9.5 × 6.8 ft — about 171 ft² of usable floor and 18 ft of usable length, which suits a compact car or coupe: a 16 ft sedan fills the length end to end, so you work one side at a time. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.
Air path and blower duty
The booth holds about 2,542 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 480 W + 950 W — 1,430 W nameplate, about 11.9 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. Powered extraction is supplied on its own circuit, so clearing overspray and holding pressure are two jobs rather than one blower doing both. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Category | Paint Booth with Exhaust Fan |
| Dimensions | 23x13x8.5Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 20 × 13 × 8.5 Ft — With exhaust → With exhaust fan · external 20 × 13 × 8.5 ft
- 26 × 13 × 10 Ft — With exhaust → With exhaust fan · external 26 × 13 × 10 ft
- 26 × 15 × 10 Ft — With exhaust → With exhaust fan · external 26 × 15 × 10 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.