
39 × 20 × 13 Ft Inflatable Paint Booth — 3 Blowers (950W × 3)
- Blowers: 3 × 950W (inflation and ventilation)
- Filtration: integrated air filter system
- External dimensions (approx.): 39 × 20 × 13 ft
- Typical use: trucks and full-size vehicles
- Ships from U.S. warehouse stock · 1-year warranty
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
This is a custom-configured Sewinfla professional inflatable paint booth sized 39 × 20 × 13 ft for full-size vehicles and trucks. Three 950W blowers handle inflation and air movement, and the booth is built with an integrated air filter system for overspray capture at the exhaust stage.
Because it is a custom configuration, internal clearances, door arrangement and filter layout are confirmed with Sewinfla support before the build. Pricing shown is the U.S. warehouse price to the U.S. mainland; buyers outside the mainland — including Alaska, Hawaii and Puerto Rico — should contact sewinfla@ejaee.com for shipping charges before paying.
Working room inside this size
The outside envelope is 39 × 20 × 13 ft, which takes 780 ft² of shop floor and holds 10,140 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 34 × 16.5 × 11.3 ft — about 561 ft² of usable floor and 34 ft of usable length, which suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.
Air path and blower duty
The booth holds about 10,140 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. It runs 3 × 950 W blowers — 2,850 W nameplate, drawing about 23.8 A at 120 V. That is past one 15 A circuit — plan a 30 A feed or two circuits before the booth arrives. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Configuration | Custom / professional |
| Blowers | 3 × 950W |
| Filtration | Integrated air filter system |
| External dimensions | 39 × 20 × 13 ft (approx.) |
| Typical use | Trucks, full-size vehicles |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 65 × 25 × 28 Ft — Custom size → Custom size · external 65 × 25 × 28 ft
- 39 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 20 × 13 ft
- 39 × 20 × 13 Ft — With exhaust → With exhaust fan · external 39 × 20 × 13 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.