
39 × 20 × 13 Ft Inflatable Paint Booth — Portable
- High-efficiency Filtration, Replaceable activated-carbon Filter
- Equipped With 3 blowers(1100w+950w+950w)
- External Dimension:39x20x13Ft, Internal Dimension Approx:33.5x15.4x11Ft
- High Quality, More Durable
- Local After-sales Service in the US.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍High-efficiency Filtration, Replaceable activated-carbon Filter 👍Equipped With 3 blowers(1100w+950w+950w) 👍External Dimension:39x20x13Ft, Internal Dimension Approx:33.5x15.4x11Ft 👍High Quality, More Durable 👍Local After-sales Service in the US.
Working room inside this size
This page publishes the internal workspace as 33.5 × 15.4 × 11 ft against the 39 × 20 × 13 ft outside envelope — 515.9 ft² of floor and 132 in of clear height. At 33.5 ft of internal length it suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 31.5 ft long by 12.4 ft wide; the 11 ft internal height clears a 7 ft van roof by 4 ft.
Air path and blower duty
The booth holds about 10,140 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 1,100 W + 950 W — 2,050 W nameplate, about 17.1 A on a 120 V circuit. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. The activated-carbon stage takes solids first, so check it after the first few full panels and then on a fixed interval.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 39x20x13Ft |
| SKU | SW-PQZP-12X6X4M-N |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 44 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 44 × 20 × 13 ft
- 39 × 16.5 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 16.5 × 13 ft
- 30 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 30 × 20 × 13 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.