
12.5 × 11.2 × 11.2 Ft Inflatable Paint Booth — Exhaust Vent
- Category: Paint Booth with Exhaust Fan
- External dimensions: 12.5x11.2x11.2Ft
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
External Dimension:12.5x11.2x11.2Ft, Internal Dimension Approx.: 9.8x9.8x9.8Ft. Equipped with an air draft device and Exhaust Fan for the booth. Comes with
Working room inside this size
This page publishes the internal workspace as 9.8 × 9.8 × 9.8 ft against the 12.5 × 11.2 × 11.2 ft outside envelope — 96 ft² of floor and 118 in of clear height. At 9.8 ft of internal length it suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 7.8 ft long by 6.8 ft wide; the 9.8 ft internal height clears a 7 ft van roof by 2.8 ft.
Air path and blower duty
The booth holds about 1,568 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. Because extraction ships separately, the booth keeps its pressure while overspray leaves through the filter path. Panel condition is the variable that matters: check after the first few full panels, then on a fixed interval.
Specifications
| Category | Paint Booth with Exhaust Fan |
| Dimensions | 12.5x11.2x11.2Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 12.5 × 11.2 × 11.2 Ft — With mini extractor → With exhaust fan · external 12.5 × 11.2 × 11.2 ft
- 13 × 8.2 × 8.2 Ft — With exhaust → With exhaust fan · external 13 × 8.2 × 8.2 ft
- 20 × 10 × 9 Ft — With exhaust → With exhaust fan · external 20 × 10 × 9 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Set Up an Inflatable Paint Booth in a Garage → Clearance, power supply and ventilation requirements for an indoor install.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.