
13 × 8.2 × 8.2 Ft Inflatable Paint Booth — Exhaust Vent
- Category: Paint Booth with Exhaust Fan
- External dimensions: 13x8.2x8.2Ft
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
· Exhaust Vent Device Connection Option: Side window - Air Draft device 39"x51" OR Front Door - Mini Air Draft Device 38.6"x29" · External Dimension:13x8.2x8.2Ft, Internal Dimension Approx.: 12x5.9x7Ft. · Equipped with an Air Draft Device and Exhaust Fan for the booth.
· Exhaust Vent Device Connection Option: Side window - Air Draft device 39"x51" OR Front Door - Mini Air Draft Device 38.6"x29" · Comes with inflation and filtration blower.(370W+550W) · High-efficiency Filtration, Replaceable activated-carbon Filter.
· Local After-sales Service in the US.
Working room inside this size
This page publishes the internal workspace as 12 × 5.9 × 7 ft against the 13 × 8.2 × 8.2 ft outside envelope — 70.8 ft² of floor and 84 in of clear height. At 12 ft of internal length it suits one motorcycle, ATV or go-kart on a stand, or a set of panels laid out together. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 10 ft long by 2.9 ft wide; the 7 ft internal height clears a 5 ft car roof by 2 ft.
Air path and blower duty
The booth holds about 874 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. Powered extraction is supplied on its own circuit, so clearing overspray and holding pressure are two jobs rather than one blower doing both. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Category | Paint Booth with Exhaust Fan |
| Dimensions | 13x8.2x8.2Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 12.5 × 11.2 × 11.2 Ft — With mini extractor → With exhaust fan · external 12.5 × 11.2 × 11.2 ft
- 12.5 × 11.2 × 11.2 Ft — With exhaust → With exhaust fan · external 12.5 × 11.2 × 11.2 ft
- 20 × 10 × 9 Ft — With exhaust → With exhaust fan · external 20 × 10 × 9 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.