
26 × 13 × 10 Ft Inflatable Paint Booth — Portable
- High-efficiency Filtration, Replaceable activated-carbon Filter
- The standard configuration is equipped with 2 blowers (480w+950w), but a booth without blowers is also available.
- External Dimension:26x13x10Ft, Internal Dimension Approx:19.7x9.8x9.3Ft.
- High Quality, More Durable
- Local After-sales Service in the US.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍 High-efficiency Filtration, Replaceable activated-carbon Filter 👍 The standard configuration is equipped with 2 blowers (480w+950w), but a booth without blowers is also available. 👍 External Dimension:26x13x10Ft, Internal Dimension Approx:19.7x9.8x9.3Ft. 👍 High Quality, More Durable 👍Local After-sales Service in the US.
Working room inside this size
This page publishes the internal workspace as 19.7 × 9.8 × 9.3 ft against the 26 × 13 × 10 ft outside envelope — 193.1 ft² of floor and 112 in of clear height. At 19.7 ft of internal length it suits a mid-size car or crossover with about a foot behind the bumper, or a compact pickup with the tailgate down. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 17.7 ft long by 6.8 ft wide; the 9.3 ft internal height clears a 7 ft van roof by 2.3 ft.
Air path and blower duty
The booth holds about 3,380 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 480 W + 950 W — 1,430 W nameplate, about 11.9 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. The filter path here is fed by the same blowers that inflate the booth, so there is no separate extraction device in the box. Add the Air Draft Device or an exhaust fan before planning full-panel work. Check the carbon stage after the first few full panels — it takes solids first — then set a fixed interval.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 26x13x10Ft |
| SKU | SW-PQZP-8X4X3M-N |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 23 × 13 × 8.5 Ft — Pro-Level booth → Pro-Level booth · external 23 × 13 × 8.5 ft
- 26 × 15 × 10 Ft — Pro-Level booth → Pro-Level booth · external 26 × 15 × 10 ft
- 20 × 13 × 8.5 Ft — Pro-Level booth → Pro-Level booth · external 20 × 13 × 8.5 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.