
26 × 15 × 10 Ft Inflatable Paint Booth — Powerful Blowers
- High-efficiency Filtration, Replaceable activated-carbon Filter
- The standard configuration is equipped with 2 blowers (750w and 950w), but a booth without blowers is also available.
- External Dimension: 26x15x10Ft, Internal Dimension Approx.:19.7x11.5x9.3Ft
- High Quality, More Durable
- Local After-sales Service in the US.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍 High-efficiency Filtration, Replaceable activated-carbon Filter 👍 The standard configuration is equipped with 2 blowers (750w and 950w), but a booth without blowers is also available. 👍 External Dimension: 26x15x10Ft, Internal Dimension Approx.:19.7x11.5x9.3Ft 👍 High Quality, More Durable 👍 Local After-sales Service in the US.
Working room inside this size
This page publishes the internal workspace as 19.7 × 11.5 × 9.3 ft against the 26 × 15 × 10 ft outside envelope — 226.5 ft² of floor and 112 in of clear height. At 19.7 ft of internal length it suits a mid-size car or crossover with about a foot behind the bumper, or a compact pickup with the tailgate down. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 17.7 ft long by 8.5 ft wide; the 9.3 ft internal height clears a 7 ft van roof by 2.3 ft.
Air path and blower duty
The booth holds about 3,900 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 750 W + 950 W — 1,700 W nameplate, about 14.2 A on a 120 V circuit. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. Nothing in this package extracts overspray — the inflation blowers also drive the filter path, so pressure drops as the panels load. Full-panel work means adding the Air Draft Device or an exhaust fan on its own circuit. Activated carbon sits behind the solids filter and loads first: look at it after the first few full panels, then on a fixed schedule.
Nineteen feet seven inches internal puts a 19 ft full-size pickup in only if you give up walking behind the tailgate; with a car it leaves about 3 ft behind the rear bumper. The 11.5 ft internal width gives 2.5 ft either side of a 6.5 ft car — the first size in the range where both flanks can be sprayed without moving around the vehicle between passes.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 26x15x10Ft |
| SKU | SW-PQZP-8X4.5X3M-N |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 28 × 15 × 11 Ft — Pro-Level booth → Pro-Level booth · external 28 × 15 × 11 ft
- 26 × 13 × 10 Ft — Pro-Level booth → Pro-Level booth · external 26 × 13 × 10 ft
- 23 × 20 × 14.5 Ft — Pro-Level booth → Pro-Level booth · external 23 × 20 × 14.5 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.