
10.8 × 8.2 × 7.2 Ft Inflatable Paint Booth — Portable
- Category: DIY-Grade Spray Booth
- External dimensions: 10.8x8.2x7.2Ft
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
DIY-Grade Spray Booth. 10.8x8.2x7.2Ft.
Working room inside this size
The outside envelope is 10.8 × 8.2 × 7.2 ft, which takes 88.6 ft² of shop floor and holds 638 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 5.8 × 4.7 × 5.5 ft — about 27.3 ft² of usable floor and 5.8 ft of usable length, which suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.
Air path and blower duty
The booth holds about 638 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Category | DIY-Grade Spray Booth |
| Dimensions | 10.8x8.2x7.2Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 13 × 8 × 8 Ft — DIY-grade → DIY-grade · external 13 × 8 × 8 ft
- 20 × 10 × 8 Ft — DIY-grade → DIY-grade · external 20 × 10 × 8 ft
- 26 × 15 × 10 Ft — DIY-grade → DIY-grade · external 26 × 15 × 10 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Set Up an Inflatable Paint Booth in a Garage → Clearance, power supply and ventilation requirements for an indoor install.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.