
13 × 8 × 8 Ft Inflatable Paint Booth — 550W Blowers
- Category: DIY-Grade Spray Booth
- External dimensions: 13x8x8Ft
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
DIY-Grade Spray Booth. 13x8x8Ft.
Working room inside this size
This page publishes the internal workspace as 10.8 × 6 × 7 ft against the 13 × 8 × 8 ft outside envelope — 64.8 ft² of floor and 84 in of clear height. At 10.8 ft of internal length it suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 8.8 ft long by 3 ft wide; the 7 ft internal height clears a 5 ft car roof by 2 ft.
Air path and blower duty
The booth holds about 832 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 550 W + 550 W — 1,100 W nameplate, about 9.2 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Category | DIY-Grade Spray Booth |
| Dimensions | 13x8x8Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 10.8 × 8.2 × 7.2 Ft — DIY-grade → DIY-grade · external 10.8 × 8.2 × 7.2 ft
- 20 × 10 × 8 Ft — DIY-grade → DIY-grade · external 20 × 10 × 8 ft
- 26 × 15 × 10 Ft — DIY-grade → DIY-grade · external 26 × 15 × 10 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Motorcycle in an Inflatable Paint Booth → Frame, tank and fairing sequence in a booth sized for motorcycle work.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.