🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

20 × 10 × 8 Ft Inflatable Paint Booth — Portable

$398.00 – $539.00
  • Category: DIY-Grade Spray Booth
  • External dimensions: 20x10x8Ft
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

DIY-Grade Spray Booth. 20x10x8Ft.

Working room inside this size

This page publishes the internal workspace as 17 × 7 × 7.2 ft against the 20 × 10 × 8 ft outside envelope — 119 ft² of floor and 86 in of clear height. At 17 ft of internal length it suits a compact car or coupe: a 16 ft sedan fills the length end to end, so you work one side at a time. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 15 ft long by 4 ft wide; the 7.2 ft internal height clears a 5 ft car roof by 2.2 ft.

Air path and blower duty

The booth holds about 1,600 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.

Specifications

CategoryDIY-Grade Spray Booth
Dimensions20x10x8Ft

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available