🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

12.5 × 11.2 × 11.2 Ft Inflatable Paint Booth — Portable

$698.99
  • High-efficiency Filtration, Replaceable activated-carbon Filter
  • Equipped With 2 blowers(370w+550w)
  • External Dimension:12.5x11.2x11.2Ft, Internal Dimension Approx:9.8X9.8X9.8Ft.
  • High Quality, More Durable
  • Local After-sales Service in the US
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

👍 High-efficiency Filtration, Replaceable activated-carbon Filter 👍 Equipped With 2 blowers(370w+550w) 👍 External Dimension:12.5x11.2x11.2Ft, Internal Dimension Approx:9.8X9.8X9.8Ft. 👍 High Quality, More Durable 👍 Local After-sales Service in the US

Working room inside this size

This page publishes the internal workspace as 9.8 × 9.8 × 9.8 ft against the 12.5 × 11.2 × 11.2 ft outside envelope — 96 ft² of floor and 118 in of clear height. At 9.8 ft of internal length it suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 7.8 ft long by 6.8 ft wide; the 9.8 ft internal height clears a 7 ft van roof by 2.8 ft.

Air path and blower duty

The booth holds about 1,568 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 370 W + 550 W — 920 W nameplate, about 7.7 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. Nothing in this package extracts overspray — the inflation blowers also drive the filter path, so pressure drops as the panels load. Full-panel work means adding the Air Draft Device or an exhaust fan on its own circuit. Activated carbon sits behind the solids filter and loads first: look at it after the first few full panels, then on a fixed schedule.

Specifications

CategoryInflatable Paint Booth, Pro-Level Spray Booth
Dimensions12.5x11.2x11.2Ft

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available