
20 × 10 × 9 Ft Inflatable Paint Booth — Portable
- High-efficiency Filtration, Replaceable activated-carbon Air Filter
- Customize Your Blower Setup: Opt for a 750W Blower or Enhanced Airflow with 480W + 750W Blowers
- External Dimension :20x10x9Ft, Internal Dimension Approx.:18.2x8.1x7.2Ft.
- High Quality, More Durable
- 24-Hour Online Customer Service
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍 High-efficiency Filtration, Replaceable activated-carbon Air Filter 👍 Customize Your Blower Setup: Opt for a 750W Blower or Enhanced Airflow with 480W + 750W Blowers 👍 External Dimension :20x10x9Ft, Internal Dimension Approx.:18.2x8.1x7.2Ft. 👍 High Quality, More Durable 👍 24-Hour Online Customer Service
Working room inside this size
This page publishes the internal workspace as 18.2 × 8.1 × 7.2 ft against the 20 × 10 × 9 ft outside envelope — 147.4 ft² of floor and 86 in of clear height. At 18.2 ft of internal length it suits a compact car or coupe: a 16 ft sedan fills the length end to end, so you work one side at a time. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 16.2 ft long by 5.1 ft wide; the 7.2 ft internal height clears a 5 ft car roof by 2.2 ft.
Air path and blower duty
The booth holds about 1,800 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 480 W + 750 W — 1,230 W nameplate, about 10.2 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. The activated-carbon stage takes solids first, so check it after the first few full panels and then on a fixed interval.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 20x10x9Ft |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 20 × 13 × 8.5 Ft — Pro-Level booth → Pro-Level booth · external 20 × 13 × 8.5 ft
- 12.5 × 11.2 × 11.2 Ft — Pro-Level booth → Pro-Level booth · external 12.5 × 11.2 × 11.2 ft
- 13 × 8.2 × 8.2 Ft — Pro-Level booth → Pro-Level booth · external 13 × 8.2 × 8.2 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Motorcycle in an Inflatable Paint Booth → Frame, tank and fairing sequence in a booth sized for motorcycle work.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.