🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

13 × 8.2 × 8.2 Ft Inflatable Paint Booth — Portable

$679.99
  • High-efficiency Filtration, Replaceable activated-carbon Filter
  • Equipped with 370W + 550W Blowers.
  • External Dimension:13x8.2x8.2Ft, Internal Dimension
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

👍 High-efficiency Filtration, Replaceable activated-carbon Filter 👍 Equipped with 370W + 550W Blowers. 👍 External Dimension:13x8.2x8.2Ft, Internal Dimension

Working room inside this size

The outside envelope is 13 × 8.2 × 8.2 ft, which takes 106.6 ft² of shop floor and holds 874 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 8 × 4.7 × 6.5 ft — about 37.6 ft² of usable floor and 8 ft of usable length, which suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Request the internal figures for your configuration before ordering — they prevail over this estimate.

Air path and blower duty

The booth holds about 874 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 370 W + 550 W — 920 W nameplate, about 7.7 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. The filter path here is fed by the same blowers that inflate the booth, so there is no separate extraction device in the box. Add the Air Draft Device or an exhaust fan before planning full-panel work. Check the carbon stage after the first few full panels — it takes solids first — then set a fixed interval.

Specifications

CategoryInflatable Paint Booth, Pro-Level Spray Booth
Dimensions13x8.2x8.2Ft

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available