🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

23 × 20 × 14.5 Ft Inflatable Paint Booth — Portable

$1,339.99
  • High-efficiency Filtration, Replaceable activated-carbon Filter
  • The standard configuration is equipped with 2 blowers (750w and 950w), but a booth without blowers is also available.
  • External Dimension:23x20x14.5Ft, Internal Dimension Approx:21.5x15.5x12.5Ft
  • High Quality, More Durable
  • Local After-sales Service in the US.
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

👍 High-efficiency Filtration, Replaceable activated-carbon Filter 👍 The standard configuration is equipped with 2 blowers (750w and 950w), but a booth without blowers is also available. 👍 External Dimension:23x20x14.5Ft, Internal Dimension Approx:21.5x15.5x12.5Ft 👍 High Quality, More Durable 👍 Local After-sales Service in the US.

Working room inside this size

This page publishes the internal workspace as 21.5 × 15.5 × 12.5 ft against the 23 × 20 × 14.5 ft outside envelope — 333.2 ft² of floor and 150 in of clear height. At 21.5 ft of internal length it suits a mid-size car or crossover with about a foot behind the bumper, or a compact pickup with the tailgate down. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 19.5 ft long by 12.5 ft wide; the 12.5 ft internal height clears a 7 ft van roof by 5.5 ft.

Air path and blower duty

The booth holds about 6,670 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 750 W + 950 W — 1,700 W nameplate, about 14.2 A on a 120 V circuit. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. The filter path here is fed by the same blowers that inflate the booth, so there is no separate extraction device in the box. Add the Air Draft Device or an exhaust fan before planning full-panel work. Check the carbon stage after the first few full panels — it takes solids first — then set a fixed interval.

Specifications

CategoryInflatable Paint Booth, Pro-Level Spray Booth
Dimensions23x20x14.5Ft

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available