
33 × 16.5 × 11.5 Ft Inflatable Paint Booth — Portable
- High-efficiency Filtration, Replaceable activated-carbon Filter
- Blower configuration optional: two blowers (950w+950w), or 3 blowers (950W+950W+750W)
- External Dimension:33x16.5x11.5Ft, Internal Workspace Approx: 26.6x12.8x9.7Ft
- High Quality, More Durable
- Local After-sales Service in the US.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
√High-efficiency Filtration, Replaceable activated-carbon Filter √Blower configuration optional: two blowers (950w+950w), or 3 blowers (950W+950W+750W) √External Dimension:33x16.5x11.5Ft, Internal Workspace Approx: 26.6x12.8x9.7Ft √High Quality, More Durable √Local After-sales Service in the US.
Working room inside this size
The outside envelope is 33 × 16.5 × 11.5 ft, which takes 544.5 ft² of shop floor and holds 6,262 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 28 × 13 × 9.8 ft — about 364 ft² of usable floor and 28 ft of usable length, which suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.
Air path and blower duty
The booth holds about 6,262 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. It runs 2 × 950 W blowers — 1,900 W nameplate, drawing about 15.8 A at 120 V. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. The activated-carbon stage takes solids first, so check it after the first few full panels and then on a fixed interval.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 33x16.5x11.5Ft |
| SKU | SW-PQZP-10X5X3.5M-N |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 30 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 30 × 20 × 13 ft
- 23 × 20 × 14.5 Ft — Pro-Level booth → Pro-Level booth · external 23 × 20 × 14.5 ft
- 39 × 16.5 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 16.5 × 13 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.