
39 × 16.5 × 13 Ft Inflatable Paint Booth — Portable
- High-efficiency Filtration, Replaceable activated-carbon Filter
- The standard configuration is equipped with 2 blowers (1100w+1100w), but a booth without blowers is also available.
- External Dimension:39x16.5x13Ft, Internal Dimension Approx:33.1x12.8x11.3Ft
- High Quality, More Durable
- Local After-sales Service in the US.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍High-efficiency Filtration, Replaceable activated-carbon Filter 👍The standard configuration is equipped with 2 blowers (1100w+1100w), but a booth without blowers is also available. 👍External Dimension:39x16.5x13Ft, Internal Dimension Approx:33.1x12.8x11.3Ft 👍High Quality, More Durable 👍Local After-sales Service in the US.
Working room inside this size
This page publishes the internal workspace as 33.1 × 12.8 × 11.3 ft against the 39 × 16.5 × 13 ft outside envelope — 423.7 ft² of floor and 136 in of clear height. At 33.1 ft of internal length it suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 31.1 ft long by 9.8 ft wide; the 11.3 ft internal height clears a 7 ft van roof by 4.3 ft.
Air path and blower duty
The booth holds about 8,366 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. It runs 2 × 1,100 W blowers — 2,200 W nameplate, drawing about 18.3 A at 120 V. That is past one 15 A circuit — plan a 30 A feed or two circuits before the booth arrives. Nothing in this package extracts overspray — the inflation blowers also drive the filter path, so pressure drops as the panels load. Full-panel work means adding the Air Draft Device or an exhaust fan on its own circuit. Activated carbon sits behind the solids filter and loads first: look at it after the first few full panels, then on a fixed schedule.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 39x16.5x13Ft |
| SKU | SW-PQZP-12X5X4M-N |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 30 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 30 × 20 × 13 ft
- 33 × 16.5 × 11.5 Ft — Pro-Level booth → Pro-Level booth · external 33 × 16.5 × 11.5 ft
- 39 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 20 × 13 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.