🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

44 × 20 × 13 Ft Inflatable Paint Booth — Portable

$4,699.99
  • 【Environmentally Friendly Filtration System,Replaceable Air Filter】
  • 【 Paint booth use 3 blowers(950w+950w+950w)】
  • 【 Dimension: 44X20X13Ft , Approx internal Dimension: 41.90x15.40x11.00Ft.】
  • Shipment within 20-25 days after order. Total lead time: 35-40 days
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

👍【Environmentally Friendly Filtration System,Replaceable Air Filter】 👍【 Paint booth use 3 blowers(950w+950w+950w)】 👍【 Dimension: 44X20X13Ft , Approx internal Dimension: 41.90x15.40x11.00Ft.】 👍 👍 Shipment within 20-25 days after order. Total lead time: 35-40 days

Working room inside this size

This page publishes the internal workspace as 41.9 × 15.4 × 11 ft against the 44 × 20 × 13 ft outside envelope — 645.3 ft² of floor and 132 in of clear height. At 41.9 ft of internal length it suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 39.9 ft long by 12.4 ft wide; the 11 ft internal height clears a 7 ft van roof by 4 ft.

Air path and blower duty

The booth holds about 11,440 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. It runs 2 × 950 W blowers — 1,900 W nameplate, drawing about 15.8 A at 120 V. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.

Specifications

CategoryInflatable Paint Booth, Pro-Level Spray Booth
Dimensions44x20x13Ft
SKUSW-POZP-13.4X6X4M

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available