🎁 Free engineering design review for custom inflatable paint booths — feasibility, concept layout and budget range.Request a review →
← Back to Shop

13 × 11.5 × 10 Ft Inflatable Paint Booth — Airtight PVC

$1,388.00 – $1,498.99
  • Category: Airtight Paint Booth
  • External dimensions: 13x11.5x10Ft
Buy on Sewinfla.com Continue Shopping
🇺🇸 U.S. Stock
🛡️ 1-Year Warranty
📦 Ready to Ship
Need a different size, airflow or filtration configuration?

Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.

Request a free custom review →

Product Description

Airtight Paint Booth. 13x11.5x10Ft.

Working room inside this size

The outside envelope is 13 × 11.5 × 10 ft, which takes 149.5 ft² of shop floor and holds 1,495 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 8 × 8 × 8.3 ft — about 64 ft² of usable floor and 8 ft of usable length, which suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.

Air path and blower duty

The booth holds about 1,495 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 500 W + 750 W — 1,250 W nameplate, about 10.4 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.

An airtight shell at this size is for shops that cannot give up the floor a full booth takes: the sealed PVC walls keep overspray off the rest of the room, and extraction pulls from one side so the space outside stays usable while you spray. At 11.5 ft across it takes a compact car or a motorcycle plus a stand — not a full-size pickup, whose 19 ft would not clear the 13 ft length.

Specifications

CategoryAirtight Paint Booth
Dimensions13x11.5x10Ft

⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.

Compare Similar Sizes

Nearest footprints in the same build class. All figures are external dimensions in feet.

Related Technical Guides

The engineering behind this product, documented on this site.

Ready to buy?

View on Sewinfla.com →

Product listing and purchasing handled by Sewinfla.com

See how professionals use inflatable paint booths in real workshops.

View Case Studies →

DIMENSIONS ARE APPROXIMATE. Each Sewinfla booth is a handmade inflatable product; measured dimensions vary with air pressure and standing conditions. The physical product as received prevails over any published figure.

Free engineering review

Not sure whether an inflatable booth fits? Get a free feasibility review.

Tell us your application, site, airflow and budget range. Our engineers assess whether inflatable is the right process — and if it is, how it should be built. No obligation.

Request a free design review →1 business day acknowledgement · NDA available