
14 × 15 × 11 Ft Inflatable Paint Booth
- Category: Airtight Paint Booth
- External dimensions: 14x15x11FT
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
Airtight Paint Booth. 14x15x11FT.
Working room inside this size
The outside envelope is 14 × 15 × 11 ft, which takes 210 ft² of shop floor and holds 2,310 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 9 × 11.5 × 9.3 ft — about 103.5 ft² of usable floor and 9 ft of usable length, which suits a parts booth — fairings, bumpers, doors, wheels and furniture components that sit on a stand rather than a whole vehicle. Request the internal figures for your configuration before ordering — they prevail over this estimate.
Air path and blower duty
The booth holds about 2,310 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 500 W + 750 W — 1,250 W nameplate, about 10.4 A on a 120 V circuit. That fits a dedicated 15 A circuit with headroom left for lighting on a separate leg. The filter path here is fed by the same blowers that inflate the booth, so there is no separate extraction device in the box. Add the Air Draft Device or an exhaust fan before planning full-panel work. Check the carbon stage after the first few full panels — it takes solids first — then set a fixed interval.
Specifications
| Category | Airtight Paint Booth |
| Dimensions | 14x15x11FT |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 17.5 × 13.5 × 9 Ft — Airtight → Airtight · external 17.5 × 13.5 × 9 ft
- 13 × 11.5 × 10 Ft — Airtight → Airtight · external 13 × 11.5 × 10 ft
- 24 × 15 × 10 Ft — Airtight → Airtight · external 24 × 15 × 10 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Set Up an Inflatable Paint Booth in a Garage → Clearance, power supply and ventilation requirements for an indoor install.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.