
17.5 × 13.5 × 9 Ft Inflatable Paint Booth — Airtight PVC
- Category: Airtight Paint Booth
- External dimensions: 17.5x13.5x9FT
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
Airtight Paint Booth. 17.5x13.5x9FT.
Working room inside this size
The outside envelope is 17.5 × 13.5 × 9 ft, which takes 236.2 ft² of shop floor and holds 2,126 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 12.5 × 10 × 7.3 ft — about 125 ft² of usable floor and 12.5 ft of usable length, which suits one motorcycle, ATV or go-kart on a stand, or a set of panels laid out together. Treat that as an estimate: request the exact internal measurements for the configuration you intend to buy, and measure the workpiece against those.
Air path and blower duty
The booth holds about 2,126 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. The activated-carbon stage takes solids first, so check it after the first few full panels and then on a fixed interval.
Seventeen and a half feet of length is the size where a mid-size car goes in lengthwise with room to open a door, and the sealed shell keeps that overspray out of the shop. Height is the constraint at 9 ft outside: subtract the wall build and a van roof is close to the ceiling, so measure a tall vehicle against the internal figure before committing to this size.
Specifications
| Category | Airtight Paint Booth |
| Dimensions | 17.5x13.5x9FT |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 14 × 15 × 11 Ft — Airtight → Airtight · external 14 × 15 × 11 ft
- 13 × 11.5 × 10 Ft — Airtight → Airtight · external 13 × 11.5 × 10 ft
- 24 × 15 × 10 Ft — Airtight → Airtight · external 24 × 15 × 10 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Set Up an Inflatable Paint Booth in a Garage → Clearance, power supply and ventilation requirements for an indoor install.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- 5-Minute Booth Setup Guide → Inflation sequence, anchor points and shutdown, step by step.