
28 × 15 × 11 Ft Inflatable Paint Booth
- Airtight PVC shell with an oversized activated-carbon filter, built to keep overspray inside the booth.
- Dimension (L×W×H): External size: 28x15x11ft, internal size approx.: 26.5x13x10ft
- Including 2 ventilation blowers(950w+950w), 500w air pump x2
- Inflate once and remain up for weeks without blowers.
- Professional Filtration System, activated-carbon filter
- In stock. Delivered 7-10 days after order.
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍Airtight PVC shell with an oversized activated-carbon filter, built to keep overspray inside the booth. 👍Dimension (L×W×H): External size: 28x15x11ft, internal size approx.: 26.5x13x10ft 👍Including 2 ventilation blowers(950w+950w), 500w air pump x2 👍Inflate once and remain up for weeks without blowers. 👍Professional Filtration System, activated-carbon filter 👍In stock. Delivered 7-10 days after order.
Working room inside this size
The outside envelope is 28 × 15 × 11 ft, which takes 420 ft² of shop floor and holds 4,620 ft³ of air. Sewn panels and air columns take their cut: across the pages that publish both figures the inside runs 1–6.3 ft shorter, 1.4–5.3 ft narrower and 0.7–2.9 ft lower than the outside (medians 5 / 3.5 / 1.7 ft). Applied here that leaves roughly 23 × 11.5 × 9.3 ft — about 264.5 ft² of usable floor and 23 ft of usable length, which suits a full-size pickup or a van with room to walk behind it. It is an estimate, so ask for the internal figures on the configuration you intend to buy before committing a vehicle to it.
Air path and blower duty
The booth holds about 4,620 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. It runs 2 × 950 W blowers — 1,900 W nameplate, drawing about 15.8 A at 120 V. That sits at the top of a 15 A circuit, so give the booth its own breaker instead of sharing a garage run. Nothing in this package extracts overspray — the inflation blowers also drive the filter path, so pressure drops as the panels load. Full-panel work means adding the Air Draft Device or an exhaust fan on its own circuit. Activated carbon sits behind the solids filter and loads first: look at it after the first few full panels, then on a fixed schedule.
Specifications
| Category | Airtight Paint Booth |
| Dimensions | 28x15x11FT |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 24 × 15 × 10 Ft — Airtight → Airtight · external 24 × 15 × 10 ft
- 17.5 × 13.5 × 9 Ft — Airtight → Airtight · external 17.5 × 13.5 × 9 ft
- 14 × 15 × 11 Ft — Airtight → Airtight · external 14 × 15 × 11 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- How to Paint a Car in an Inflatable Paint Booth → Panel sequence, tack-off routine and overspray control for a full respray.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.