
56 × 25 × 20 Ft Inflatable Paint Booth — Portable
- 【Environmentally Friendly Filtration System,Replaceable Air Filter】
- 【 the Paint booth comes with 6 1100W blowers 】
- 【 Dimension: 56ftx25x20Ft , Approx internal Dimension: 53.60x19.70x17.10Ft.】
- Shipment within 20-25 days after order. Total lead time: 35-40 days
Tell us the workpiece, site and process. Our engineers will confirm whether an inflatable booth is feasible and how it should be built. Free engineering review; NDA available.
Request a free custom review →Product Description
👍【Environmentally Friendly Filtration System,Replaceable Air Filter】 👍【 the Paint booth comes with 6 1100W blowers 】 👍【 Dimension: 56ftx25x20Ft , Approx internal Dimension: 53.60x19.70x17.10Ft.】 👍 👍 Shipment within 20-25 days after order. Total lead time: 35-40 days
Working room inside this size
This page publishes the internal workspace as 53.6 × 19.7 × 17.1 ft against the 56 × 25 × 20 ft outside envelope — 1,055.9 ft² of floor and 205 in of clear height. At 53.6 ft of internal length it suits a full-size truck, a boat on a trailer, or more than one vehicle — this is the length where a full side respray happens in one pass. Leave about a foot front and back and a foot and a half each side and the largest workpiece that still gives you room to swing a gun is roughly 51.6 ft long by 16.7 ft wide; the 17.1 ft internal height clears a 7 ft van roof by 10.1 ft.
Air path and blower duty
The booth holds about 28,000 ft³ of air, and the blower set has to keep that volume pressurised while air leaves through the filter panels. The set is 1,100 W + 1,100 W — 2,200 W nameplate, about 18.3 A on a 120 V circuit. That is past one 15 A circuit — plan a 30 A feed or two circuits before the booth arrives. No extraction device is included: the blowers that hold the walls up also push air through the filters, which is why the booth stiffens on clean filters and softens as they load. For full-panel work, add the Air Draft Device or an exhaust fan as a separate extraction circuit. Filter panels are the restriction in that path, so check them after the first few full panels and then on a fixed interval.
Specifications
| Category | Inflatable Paint Booth, Pro-Level Spray Booth |
| Dimensions | 56x25x20Ft |
| SKU | SW-PQZP-17x7.5x6M |
⚠ All dimensions are approximate. As a handmade inflatable product, actual measurements may vary based on air pressure, inflation level, and standing conditions. The physical product received shall prevail.
Compare Similar Sizes
Nearest footprints in the same build class. All figures are external dimensions in feet.
- 44 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 44 × 20 × 13 ft
- 39 × 20 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 20 × 13 ft
- 39 × 16.5 × 13 Ft — Pro-Level booth → Pro-Level booth · external 39 × 16.5 × 13 ft
Related Technical Guides
The engineering behind this product, documented on this site.
- Size-by-Size Inflatable Paint Booth Guide → Operating notes, filtration tables and safety procedures written per size class.
- How to Choose the Right Inflatable Paint Booth Size → External vs internal dimensions, height clearance and blower sizing for a given footprint.
- Ventilation Design: Exhaust Fans, Airflow & Filtration → How intake, exhaust airflow and filter stages are arranged on a Sewinfla booth.